Tools for Moving Sliding Pocket Doors

Sliding pocket doors – Many antique houses feature pocket doors – top-hung or floor-to-floor doors that roll away from the wall when sliding open. When installed properly, these doors can work well for decades. Unfortunately, not all pocket door installations are carried out as well. In addition, household settling, moisture and other factors can misaligned even the best-made pocket doors. While these doors are often difficult to adjust after installation, adjustments are not impossible. All you need is a little patience and the right tools.
Depending on the age of the sliding pocket doors, you may have a flat head or a Phillips head screwdriver to remove the damaged lane or flip up stops. Take care to have the screwdriver sized for screws. An excessively large or small screwdriver can damage the groove of the screw head, making the head difficult to replace later. Hammer and pliers, repair a track bent or pleasing to the faulty sight using a hammer. Keep track firmly with pliers or a vice, and use the hammer to remove bends, bumps and other damages that can keep the sliding doors clean. Take care of strike not too difficult as this can introduce new dents instead of removing the old ones. The hammer also works for retail loose or distorted butt molding.
Broom or vacuum cleaner. Sometimes, sliding pocket doors can come out of alignment due to dirt or debris trapped in the lane. To remove this material, rock the door slowly out of your pocket, and support it on a wedge or block. Scrape under the door to remove debris, and use a broom or vacuum cleaner to clean the runway. Gently slide the door back into the pocket, and make sure it moves freely. Drill and drum adjuster, deformed asparagus within the bag can prevent the door from sliding completely back. Shave the studs back to allow proper clearance, which requires removing the surface of the wall on the affected side of the shaving bag and the stud using a drill with a rasp drum accessory. Be careful to remove the material just enough to allow the door to slide cleanly. Once the bolt is formed properly, repair the wall surface.

12 Photos Gallery of: Tools for Moving Sliding Pocket Doors

Smart Sliding Pocket DoorsSliding Pocket Doors StyleSliding Pocket Doors PlanSliding Pocket Doors IdeasNice Sliding Pocket DoorsModern Sliding Pocket DoorsLuxury Sliding Pocket DoorsIdeas Sliding Pocket DoorsGreat Sliding Pocket DoorsElegant Sliding Pocket DoorsCute Sliding Pocket DoorsAwesome Sliding Pocket Doors

Related Post from Tools for Moving Sliding Pocket Doors

  • Perfect Garage Door Weather Stripping

    Installing Garage Door Weather Stripping

    Garage door weather stripping at the bottom of the door helps seal the bottom of the door and garage floor when the door is closed. Steel and fiberglass garage doors use a weather strip that ensures i

  • Popular Fiberglass Garage Doors

    How to Repair a Fiberglass Garage Doors

    Fiberglass garage doors are light but strong. The surface is also easy to clean, but the door itself can break if you hit it with a car or tractor. Repairing the doors requires some work and depending

  • Simple Acrylic Console Table

    Hanging Mirror over Acrylic Console Table

    Acrylic console table – If you can use hangers that you can nail directly in the rules of the wall, go for it. More often, however, the studs are not released comfortably at the place you select