Granite kitchen counter – Installing a granite countertop was a job that was left to the granite installers. Due to the nature of the material, previously highly specialized tools were required to achieve a quality kitchen countertop installation. However, with the increasing popularity of granite countertops, they are now available in standard shapes and sizes with preformed edges at a reasonable price, and the kitchen installation techniques have evolved so that any quality contractor can offer this service. Carefully remove material from the existing hob, disconnect all gas lines and remove appliances. Always have at least one helper when placing heavy boards. Granite can crack or break under its own weight, especially in weak spots like around the sink cutouts.
When you are installing granite kitchen counter, make sure all cabinets are level and securely attached to the floor and wall. The top surfaces of the cabinets should be level with a variation of less than ⅛ inch in a 10 foot span. Wall surfaces should be plumbed with a variation of less than ⅛ of a straight plane in a 10-foot span. Exceeding these tolerances will result in excessive wedging and wide spaces with filler material. Although some granite slabs over 20 millimeters thick can be used without the need for a complete substrate that supports the stone, typically at least ¾ inch of plywood should be placed at sea or outdoors above cabinets to support granite. Drill pilot holes to prevent chipboard material from fraying and secure the plywood with screws. Sinks may require additional framing or supports to support the weight of the sink and its components.
Use craft paper or something stiffer to create an exact worktop template and other surfaces, such as splash guards, that will be covered with granite. Mark the sink or stove openings accurately, as well as any other cut you may have to make to granite. Be sure to include the outline in the template. Bring the granite kitchen counter template to your home depot or any other material supplier along with the color, pattern and border type selections your client has chosen, and order the countertop. Your supplier can advise you on the location of the unions, if necessary. To obtain a more precise installation, at the same time select a new sink to fit the hob.