Platform loft bed for your child’s room is a space-saving solution that opens up more than 20 square meters of space for other applications. You can spend a few hundred dollars buying a frame or building your own with an afternoon job. Of course, a bunk bed is as good for adults as it does for children to create a storage solution for living communities or other tight living conditions. Sand all the surfaces of your timber. It does not have to be polish-smooth, but should be free from any inconvenience that can cut or splinter your children. Apply a layer of stains or paint to all surfaces of timber. Let it dry.
Build platform loft bed, place the four beams in a rectangle with the 36-inch beams inside the 75-inch beams, all four beams standing on their 2-inch sides. Finish beams with two wooden screws per joint. Run screws through face 75-inch beams and at the end of 36-inch beams. Place the plywood top on the frame. Screw in place with a screw per corner. Set a position in a corner consisting of two beams on the underside of the frame. Screw it into place with three wooden screws, pivoted through the plywood and at the end of the beam. Strength with two screws driven through each adjacent beam and in the sides of the post. Repeat for each of the three remaining corners and posts.
Platform loft bed, connect to positions on one 75-inch side of the bed by connecting a 72-inch plank, located at the bottom edge 40 inches from the floor. Screw it into place with four screws per beam set in the corners of the rectangle formed by the shelf overlapping beam. Put the other 72-inch plank directly opposite the first one. Screw in place with four screws per beam. Connect to positions on one 39-inch side of the bed by connecting a 36-inch plank, placed with the bottom edge 28 inches from the floor on the inside of the posts. This will place it with the top edge flushing the bottom edge of the 72-inch plank. Screw it into place with four screws per beam set in the corners of the rectangle formed by the shelf overlapping beam. Attach another 36-inch plank directly opposite the first, on the outside of the posts, to screw it into place with four wooden screws per beam.