Full size trundle beds are an incredibly practical invention when you have very little room to spare and happen to have frequent house guests. A trundle bed is the same size as a regular bed but is very low profile so it rests on the floor or close to it. It has a mattress and looks like a regular bed with the only exception being the height of buying a trundle bed can be expensive but making you are surprisingly easy.
This can be the hardest part of making a trick. Use the tape measure to measure the height of the bed where it will be stored. You only need to deal with the room below draw more inches from this number to reach a maximum height of full size trundle beds. This helps with the closing of accounts for pushing the trundle bed in and out of under the main bed. Measure dimensions of the mattress you want to use with trundle. Leave an inch or so for the clearance so that the mattress can fit comfortably inside the frame. The only way a trundle bed can work is if the trundle bed is less than or the same size as the bed it is tucked in.
Collecting the full size trundle beds is quite easy, but you have to trim the tree. The 2×4 is used for the bed of the bed while the plywood is base. Use measurements, you took and trim 2×4 to these lengths. If you are not familiar with using a saw you may be able to get them cut free of charge from the place you bought them from plywood will also need to be trimmed to the size if the room under normal bed is appropriate then use two plates of plywood to the bottom. If you use a double bottom, then stack the plywood and attach them together with a stitch in each corner. Fill the edges with one stitch each foot and one in the middle. Place each of the 2×4 along the side of the base and nail in place on the inside of the frame, in each corner, place a corner bracket.