Wood kitchen counter – A kitchen countertop is often one of the more decorative elements in your kitchen. Create a homemade kitchen counter will give your surroundings own unique look. If you are familiar with do-it-yourself projects and have experience using power tools, this project can be simple. Those who do not know the practical projects can be found to create a homemade kitchen counter quite difficult and time consuming.
Homemade wood kitchen counter, find a place to build your countertop. Build off-property, in your garden, or directly on your kitchen cabinets. Doing this can help you save time by eliminating the step of moving a finished countertop. Take all necessary measurements. Determine the length, width and height of the worktop by measuring the outer edges of the cabinet. Measure the height by calculating how long bench should fit over the cabinet, about 1 1/2 inches, and how long you want it. Determine exact and accurate figures. An experienced carpenter’s motto is measure twice, cut once. Take measurements twice to ensure accuracy before cutting the wood. Choose wood for the bench. Visit your local home improvement stores. Find the perfect wood to suit your taste and meet sustainability requirements. Ask about any wooden style, durability and concreteness.
Cutting wood with a power sander. You may want to double check measurements before cutting the wood. After cutting it, clean the area where the countertop must be attached. Remove dust and debris surrounding it. Attach the wood to the cabinet top with a hammer and nails. The nails should be about 4-5 inches apart. Add backsplash. Fix it on the back of the countertop and the top of the wall to the bottom of the cabinets. Use concrete or epoxy to attach the plates to the wood kitchen counter and the wall. Make sure it fits perfectly against the wall. Add finishing touches. Clean the countertop with a wet wipe to remove dust. Use epoxy for small areas that need to be filled in. Wipe away any excess glue from the counter and backsplash. When the glue is dry, clean up. Use a damp cloth to clean the disk. Brush on a waterproof varnish. Examine the installation and let it dry overnight.