Loft bed with desk underneath – If your bedroom space is limited and you want an innovative way to fit both a bed and a desk, a desk/cot can be the ideal solution. College students living in crowded dorms have long mounted their beds on DIY columns and support. While building your own cot is a moderately simple project, be sure to follow basic procedures carefully to ensure robust construction.
Build the desk and storage for loft bed with desk underneath. Cut 2×6 boards to form the sides of the “box” your mattress will put on. Cut two boards to measure 78 inches and two more to measure 37 inches. Fit the four sides of the box. Let the long pieces of patches shorter so your box measures 40×78 inches. Attach the four 2×6 boards at their corners with 12 3-inch or screws. Place the plywood on top of the box. Use twelve 1-5/8 inch or screws to attach plywood to the box. Space them evenly around the perimeter. Action 44 inches along the length of each 4×4 post. Adding all four services together and marking them once will ensure that they are yet. This line represents where the bed box intersects with the vertical 4×4 posts. Raise 2×6 boards and 4×4 posts according to the line you have already drawn. Drill 1/4 “hole through 2×6 boards and 2 inches into 4×4 posts. Use the wooden screws to connect the pieces.
Determine whether you will buy a desk or build your own. Check used resources to find an economical option that fits under your DIY loft bed with desk underneath. Use the same construction principles if you decide to build a smaller desktop, always measure twice and cut once. Consult the network plans to design a desk with the right measure for your loft. Finish your bed and desk with a matching paint. If you have purchased the desk in a finished wood, sand before applying paint, achieve a matching effect. Instead of painting, you can paint the bed and desk for a different look. Follow the instructions carefully for the strong joints. Do not overload the bed or apply unnecessary horizontal force to its frame.