Wood bathroom vanities – Making an antique dresser to a single vanity, or change a bigger piece of a double vanity, requires some changes. Making an opening for a traditional sink is more invasive and leaves you with less storage space than if you choose a sink that rests on top of the dresser. The sink designs for the top of your dresser-turned-bathroom vanity can vary from a vintage ceramic bowl painted by someone’s grandmother, a stylish metal pool, and perfect for a contemporary style home. Designer glass bowls perched atop a countertop marble tile or a mosaic tile countertop work in contemporary or eclectic style. Making a dresser into a vanity mirrors a combination of old and new, with different textures to create unique designs.
Plumbing for your agency wood bathroom vanities is the same as for a traditional bathroom vanity. Need pipes running hot and cold water, and drain. All the pipes for a top sink vanity can run in place of the top drawer of your agency. If you do a double sink vanity, that plumbing take up space on both sides of the dresser. You will lose at least two boxes if you sink the sink in the dresser, so you need to place the sink basin and pipes. Plumbing fixtures can change the design of your vanity that they can be built into the countertop or built into the wall behind the vanity, just below the mirror.
Once you have decided on the style and plumbing fixtures for your wood bathroom vanities, you need to prepare addresses for the transition. Remove the drawer from your dresser and cut holes, if required, for the sink and the faucet in the countertop. You also need to cut holes in the back of your agency to run the pipes to the wall of the tubes. Take the drawers out of some boxes displaced and glue them directly on the dresser face. You can use the crates as storage in the basement or garage; you should save them just in case you ever change your vanity back into the agency.