Upholstered king bed with storage – Building a storage frame for your king bed is a one-day project that can add 40 cubic meters of storage space to the bedroom. These plans are for a standard king-size bed, with storage space for sliding on one side and a large storage box on the other for seasonal items such as decorations and winter wear. Prepare your material and tool to do this project. Like a drill and plywood. Prepare your heart too for this project.
Set a 76-inch plank and an 80-inch plank together in a L-shape. Connect them with two L-holders on the inside of a corner of L. Put a L stag 2 inches from the top and a 2 inches from the bottom. Connect the other 76-inch plank to the other end of the 80-inch plank, make a C-shape. Connect the same way as you did in step 1, with two L-hinges. Place the other 80-inch plank at the center of the two 76-inch planks, running parallel to the first 80-inch plank. Screw with two L-hinges for each shorter plank. Place a plywood board on the open side of the frame. It should be so that the inner edge is equal to 80-inch plank that runs along the center. Screw it into place with a wooden screw for each corner of the plywood board for upholstered king bed with storage.
Set the second plywood disc next to the one you just installed. Its inner edge should be against the edge of the first plywood board. Its outer edge is level with outside 80-inch plank. Fixed plywood boards with your six hinges, distributed every 10 inches. Slide a post under the lip of the plywood on the open side of the bed frame. Screw 16 inches from the shelf that forms the end of the upholstered king bed with storage, using a wooden screw drilled down through the plywood and in the middle of the end of the post. Fix the other three services with the same method, each, placed 16 inches away from the posts that you mounted before that.